[scribus] Easier word wraparound and graphic images.

Peter Nermander peter at nermander.se
Mon Dec 15 06:33:27 UTC 2014


> 1. Put the graphic element on a layer higher than
> the text layer.
> 2. Make sure the layer containing the graphic has
> focus.
> 3. Make sure the graphic element has focus.
> 4. Hit the F2 key.
> 5. On the popup window select "use contour line"
> 6. In the upper right hand corner select "Edit"
> 7. On the next popup window select "Edit Contour
> Line"
> 8. (Optional) move the corners of the graphic
> around.
> 9.Select "End editing"
> 10. Check to make sure that the text actually
> flows around the graphic.
>
>
I think you are getting things wrong here.

First, the graphic does not have to ba on a separate layer, it's the LEVEL
that has to be above the text frame. Thus "bring to top" is what's needed
if the graphic frame is not already on top, but if the image frame was
created after the text frame it is usually already above the text frame.

Second, if you don't want to use the contour line you don't have to edit
it. The default is (if I recall correct) to use the image frame shape. If
you DO want to use the contour line, it's obvious you will have to edit it.
Scribus can not know the shape of the image.

So all that has to be done is:

1. Move the image fram one top of the text frame.
2. Select "Text flow around frame->Use frame shape" for the image frame.

Note also that of course you can have text flow around other frames than
image frames.

/Peter
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.scribus.net/pipermail/scribus/attachments/20141215/ca6371ee/attachment.html>


More information about the scribus mailing list