[scribus] 150 error

[Gregory Pittman]

On 02/16/2012 03:25 PM, john Culleton wrote:
> On Thu, 16 Feb 2012 08:27:42 +0100 ale rimoldi
> <ale.comp_06 at xox.ch>  wrote:
>
>> hi
>>
>>> Am 15.02.2012 01:34, schrieb john Culleton:
>>>> On Tue, 14 Feb 2012 20:51:32 +0100 Franz Schmid
>>>> <Franz.Schmid at altmuehlnet.de>  wrote:
>>>>
>>>>>>
>>>>>> I just built svn head without problems.
>>>>> You need a fairly recent version of poppler to compile,
>>>>> which version of poppler do you have?
>>>>>
>>>>> Franz Schmid
>>>>
>>>> poppler-0.18.3.
>>>>
>>>> Installed yesterday. Ran ldconfig. Just rebooted. Error
>>>> recurs.  Should I back up to poppler-0.18?
>>> Hmm, don't know. Yesterday i've tested poppler-0.18.3 and it
>>> compiled fine here. Maybe the compiler just gets the wrong
>>> include path for poppler.
>>
>> several months ago, i've tried to get scribus to use a poppler
>> installed in at a custom location... but i could not get it to
>> work...  (it was at /usr/local/poppler/)
>>
>> ciao a.l.e
>>
> OK I am stuck again. I wiped out all references to poppler in
> /usr/local/bin, /usr/local/lib and /usr/local/include. I made
> three separate compiles for poppler, one with prefix /usr/share,
> one with prefix /usr and one with prefix / . I ran make install
> and ldconfig after each compile. I wiped my work directory for
> scribus 150 clean.
>
> After all this I still blow up with this message:
> -------------------------------------------------------
> CMake Error: The following variables are used in this project, but they are set to NOTFOUND.
> Please set them or make sure they are set and tested correctly in the CMake files:
> POPPLER_INCLUDE_DIR
>     used as include directory in directory /usr/local/src/s150
>     used as include directory in directory /usr/local/src/s150/scribus
>     used as include directory in directory /usr/local/src/s150/scribus/dtd
>     used as include directory in directory /usr/local/src/s150/scribus/manpages
>     used as include directory in directory /usr/local/src/s150/scribus/colormgmt
>     used as include directory in directory /usr/local/src/s150/scribus/desaxe
>     used as include directory in directory /usr/local/src/s150/scribus/fonts
>     used as include directory in directory /usr/local/src/s150/scribus/styles
> ---etc
>

Keep in mind that Scribus is looking for the header files for poppler.
In Fedora this is acquired with poppler-devel.

Greg