[Scribus] Page elements from a certain masterpage drop 5mm when printed

Julian Robbins julian.robbins
Mon Aug 7 13:49:52 CEST 2006


Hi

I have been putting together a Datasheet in Scribus for a while using a mixture of Master pages and std pages using Ubuntu Dapper 6.0.6 Scribus 1.3.3.2.

However, I have noticed that my template of side right hand strip and bottom bar drops about 5mm on pages 2 onwards compared to page 1, but only went printed out. The problem only seems to be found on the pages with content from the Master pages on pages 2 and 3. What is strange is that all items are aligned correctly on every page in Scribus itself. But when printing Page 1 is completely correct, pages afterwards are wrongly printed. Page 1 is based on one master page, and 2 and 3 based on other master pages.

Printing directly from Scribus gives the same effect as producing a PDF and reading in either Evince or Acrobat reader.

Any suggestions as to the fault? Or even better how to fix this? My only thought is to copy my working master page, copy it, and use this master page instead on the subsequent pages.

I have added this to the bugtracker 0004109, for perusal.

Julian



More information about the scribus mailing list