[scribus] Scribus 1.4.1 on FreeBSD 10: error importing images

Erich Dollansky erich at alogreentechnologies.com
Sun Aug 26 06:04:22 UTC 2012


Hi,

On Sun, 26 Aug 2012 07:56:11 +0200
ale rimoldi <ale.comp_06 at xox.ch> wrote:

> are there symlinks in the path to your images?
> 
yes. My machines have different disk layouts. To make all appear the
same on them, I use symlinks all over.

Erich

> ciao
> a.l.e
> 
> > Hi,
> > 
> > I noticed some problems with imported images since I upgraded to
> > 1.4.1. Analysing the sla file shows this:
> > 
> >         <PAGEOBJECT OwnPage="0" PTYPE="2" XPOS="596.06362992126"
> >         YPOS="62.5209598425197" WIDTH="28.3465" HEIGHT="28.3465"
> >         RADRECT="0" FRTYPE="0" CLIPEDIT="0" PWIDTH="1" PCOLOR="None"
> >         PCOLOR2="None" COLUMNS="1" COLGAP="0" NAMEDLST=""
> > SHADE="100" SHADE2="100" GRTYP="0" ROT="0" PLINEART="1" PLINEEND="0"
> >         PLINEJOIN="0" LOCALSCX="0.0499938271604938"
> >         LOCALSCY="0.0499938271604938" LOCALX="0" LOCALY="0"
> > PICART="1" PLTSHOW="0" BASEOF="0" textPathType="0"
> > textPathFlipped="0" FLIPPEDH="0" FLIPPEDV="0" SCALETYPE="0"
> > RATIO="1" PRINTABLE="1" ANNOTATION="0" ANNAME="" TEXTFLOWMODE="0"
> > TEXTFLOW="0" TEXTFLOW2="0" TEXTFLOW3="0" AUTOTEXT="0" EXTRA="0"
> > TEXTRA="0" BEXTRA="0" REXTRA="0" FLOP="0"
> >         PFILE="../../../../../../../../usr/usr/home/Projekte/ALO/Documents/Descriptions/Graphics/Library/ALO-2-Maldives.png"
> >         PFILE2="" PFILE3="" PRFILE="" EPROF="" IRENDER="1"
> > EMBEDDED="0" LOCK="1" LOCKR="0" REVERS="0" TransValue="0"
> > TransValueS="0" TransBlend="0" TransBlendS="0" isTableItem="0"
> > TopLine="0" LeftLine="0" RightLine="0" BottomLine="0"
> > isGroupControl="0" NUMDASH="0" DASHS="" DASHOFF="0" NUMPO="16"
> > POCOOR="0 0 0 0 28.3465 0 28.3465 0 28.3465 0 28.3465 0 28.3465
> > 28.3465 28.3465 28.3465 28.3465 28.3465 28.3465 28.3465 0 28.3465 0
> > 28.3465 0 28.3465 0 28.3465 0 0 0 0 " NUMCO="16" COCOOR="0 0 0 0
> > 28.3465 0 28.3465 0 28.3465 0 28.3465 0 28.3465 28.3465 28.3465
> > 28.3465 28.3465 28.3465 28.3465 28.3465 0 28.3465 0 28.3465 0
> > 28.3465 0 28.3465 0 0 0 0 " NUMGROUP="0" GROUPS=""
> > startArrowIndex="0" endArrowIndex="0" OnMasterPage="" ImageClip=""
> > ImageRes="0" Pagenumber="0" isInline="0" fillRule="1"
> > doOverprint="0" gXpos="0" gYpos="0" gWidth="0" gHeight="0" LAYER="0"
> >         BOOKMARK="0" NEXTITEM="-1" BACKITEM="-1"> <trail/>
> >         <PageItemAttributes/> </PAGEOBJECT>
> > 
> > Of course, the directory /usr/usr does not exist.
> > 
> > This file was not processed with an editor but only with scribus
> > 1.4.1.
> > 
> > Is this problem known? I did not find it in my mail archive.
> > 
> > Erich
> > 
> > ___
> > Scribus Mailing List: scribus at lists.scribus.net
> > Edit your options or unsubscribe:
> > http://lists.scribus.net/mailman/listinfo/scribus
> > See also:
> > http://wiki.scribus.net
> > http://forums.scribus.net
> 
> 
> ___
> Scribus Mailing List: scribus at lists.scribus.net
> Edit your options or unsubscribe:
> http://lists.scribus.net/mailman/listinfo/scribus
> See also:
> http://wiki.scribus.net
> http://forums.scribus.net
> 




More information about the scribus mailing list