[scribus] Scribus 1.4.1 on FreeBSD 10: error importing images

Stefan liststostefan at gmx.de
Sun Aug 26 12:06:01 UTC 2012


I experience a quite similar behaviour since upgrading to 1.4.1 on two
machines running Ubuntu 12.04 64bit.

As can be seen by viewing the sla-file in a text editor, paths to images
containing symlinks are converted to invalid paths upon saving the file.
This seems to happen by Scribus adding "../" to the path each time the
file is saved.

Everything seems to work fine if no symlinks are involved.


Stefan



Am 26.08.2012 07:56, schrieb ale rimoldi:
> hi erich,
> 
> are there symlinks in the path to your images?
> 
> ciao
> a.l.e
> 
>> Hi,
>>
>> I noticed some problems with imported images since I upgraded to
>> 1.4.1. Analysing the sla file shows this:
>>
>>         <PAGEOBJECT OwnPage="0" PTYPE="2" XPOS="596.06362992126"
>>         YPOS="62.5209598425197" WIDTH="28.3465" HEIGHT="28.3465"
>>         RADRECT="0" FRTYPE="0" CLIPEDIT="0" PWIDTH="1" PCOLOR="None"
>>         PCOLOR2="None" COLUMNS="1" COLGAP="0" NAMEDLST="" SHADE="100"
>>         SHADE2="100" GRTYP="0" ROT="0" PLINEART="1" PLINEEND="0"
>>         PLINEJOIN="0" LOCALSCX="0.0499938271604938"
>>         LOCALSCY="0.0499938271604938" LOCALX="0" LOCALY="0" PICART="1"
>>         PLTSHOW="0" BASEOF="0" textPathType="0" textPathFlipped="0"
>>         FLIPPEDH="0" FLIPPEDV="0" SCALETYPE="0" RATIO="1"
>> PRINTABLE="1" ANNOTATION="0" ANNAME="" TEXTFLOWMODE="0" TEXTFLOW="0"
>>         TEXTFLOW2="0" TEXTFLOW3="0" AUTOTEXT="0" EXTRA="0" TEXTRA="0"
>>         BEXTRA="0" REXTRA="0" FLOP="0"
>>         PFILE="../../../../../../../../usr/usr/home/Projekte/ALO/Documents/Descriptions/Graphics/Library/ALO-2-Maldives.png"
>>         PFILE2="" PFILE3="" PRFILE="" EPROF="" IRENDER="1"
>> EMBEDDED="0" LOCK="1" LOCKR="0" REVERS="0" TransValue="0"
>> TransValueS="0" TransBlend="0" TransBlendS="0" isTableItem="0"
>> TopLine="0" LeftLine="0" RightLine="0" BottomLine="0"
>> isGroupControl="0" NUMDASH="0" DASHS="" DASHOFF="0" NUMPO="16"
>> POCOOR="0 0 0 0 28.3465 0 28.3465 0 28.3465 0 28.3465 0 28.3465
>> 28.3465 28.3465 28.3465 28.3465 28.3465 28.3465 28.3465 0 28.3465 0
>> 28.3465 0 28.3465 0 28.3465 0 0 0 0 " NUMCO="16" COCOOR="0 0 0 0
>> 28.3465 0 28.3465 0 28.3465 0 28.3465 0 28.3465 28.3465 28.3465
>> 28.3465 28.3465 28.3465 28.3465 28.3465 0 28.3465 0 28.3465 0 28.3465
>> 0 28.3465 0 0 0 0 " NUMGROUP="0" GROUPS="" startArrowIndex="0"
>>         endArrowIndex="0" OnMasterPage="" ImageClip="" ImageRes="0"
>>         Pagenumber="0" isInline="0" fillRule="1" doOverprint="0"
>>         gXpos="0" gYpos="0" gWidth="0" gHeight="0" LAYER="0"
>>         BOOKMARK="0" NEXTITEM="-1" BACKITEM="-1"> <trail/>
>>         <PageItemAttributes/> </PAGEOBJECT>
>>
>> Of course, the directory /usr/usr does not exist.
>>
>> This file was not processed with an editor but only with scribus
>> 1.4.1.
>>
>> Is this problem known? I did not find it in my mail archive.
>>
>> Erich
>>



More information about the scribus mailing list