[scribus] [Fwd: Using Scribus for book-signature layout]

Stefan stmstmstmster at googlemail.com
Mon Oct 17 13:46:14 UTC 2011


If you self-print your book in a copyshop then you need your own imposition.
If not, your commercial printer will do it for you, as it is not easy
and depends on his specific machines.

Have you thought about podofo tools?

http://podofo.sourceforge.net/

2011/10/14 bobparham at comcast.net <bobparham at comcast.net>:
>
>
> On 10/11/2011 1:11 AM, Peter Linnell wrote:
>>
>> ---
>>
>> Dear Sir or Madam,
>>
>> In looking for page-layout software within the price range of my
>> non-existent budget, I found and downloaded Scribus and GhostWriter.
>>
>> I have already laid out a book using Publish 2007, all seventy-two pages
>> on
>> nineteen double-sided folios.  A copy of the master has been cut and is
>> ready to bind.
>>
>> However, I would like to do the lay-out in in three-sheet signatures of
>> twelve pages, since glueing may prove better with folds than with single
>> edges.
>>
>> The page number lay-out for the first signature should be:
>>
>> Sheet 1 of Signature 1, recto, left to right:  Page 12&  Page 01
>> Sheet 1 of Signature 1, verso, left to right:  Page 02&  Page 11
>>
>> Sheet 2 of Signature 1, recto, left to right:  Page 10&  Page 03
>> Sheet 2 of Signature 1, verso, left to right:  Page 04&  Page 09
>>
>> Sheet 3 of Signature 1, recto, left to right:  Page 08&  Page 05
>> Sheet 3 of Signature 1, verso, left to right, Page 06&  Page 07
>>
>> Page 01 is blank.
>> Page 02 is blank.
>> Page 03 is the Title Page (not marked with page number).
>> Page 04 is the copyright page (not marked with page number.
>> Page 05 is the Dedication Page (no page number or title banner).
>> Page 06 is the blank reverse of the Dedication Page.
>> Page 07 is the Acknowledgments Page (no page number or title banner).
>> Page 08 is the blank reverse of the Acknowledgments Page.
>> Page 09 is the Table of Contents (page ix in the bottom right-hand corner,
>> in italics).
>> Page 10 is the blank reverse of the Table of Contents.
>> Page 11 is page 1 of the text body (header banner has the title on the
>> outside and the page number on the inside.
>> Page 12 is the blank reverse of the Introduction.
>>
>> Page 13 would be on the right end of the recto of Sheet 4, Signature 2
>>
>> The book is 5.25 inches wide with half-inch margins all the way around
>> except for the gutter, which is three-quarters of an inch wide.  It is 8.5
>> inches high and about three-eighths of an inch thick.  The dimensions were
>> determined by my itsy-bitsy budget and the need to use letter-sized
>> photographic paper for the cover.
>>
>> Can Scribus be used to accomplish this?
>>
>> Sincerely,
>>
>> Christine Wolfe, author
>> the,ubiquitous.wolfe at gmail.com
>>
>>
>
> For what it's worth, I am in the process of writing a book using Scribus. It
> will be similar to the one you describe and will be 5 ½ X 8 ½ containing
> probably about 150 pages. I will only need a few copies initially for family
> members and am printing 8 ½ X 11 sheets front and back for my signatures.
> These are then folded in half. So far, I have printed 44 pages for the
> initial copy.
>
> I am using my PDF XChange Reader which arranges the pages to print properly
> on the sheets using Multi Page Printing. The kind people at Tracker Software
> who provide this software have been gracious enough to help me solve a
> problem that comes up when doing this printing on an ink jet printer. This
> problem has to deal with improper margins that come about because of the
> unprintable area that inkjets provide to eliminate the possibility of
> spraying ink into the case when printing too close to the edge of the sheet.
> This unprintable area is added to the margins created in Scribus which makes
> the margins too wide and in turn shrinks the width of the body text.
>
> Finally, I plan to produce a cover using Scribus and bind the initial copies
> personally as paperbacks. If I have copies run by a commercial printer, they
> can do their own imposition.
>
> If you have further questions about this process, please contact me.
>
> Bob P.
>
>
>
>
>
>
>
>
>
> *Bob Parham*
>
> *People may forget what you did and people may forget what you said but
> people will never forget how you made them feel.
> *
>
> (\__/)
> (='.'=)
> (")_(")
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> <http://lists.scribus.net/pipermail/scribus/attachments/20111014/7f8b31f3/attachment.html>
> ___
> Scribus Mailing List: scribus at lists.scribus.net
> Edit your options or unsubscribe:
> http://lists.scribus.net/mailman/listinfo/scribus
> See also:
> http://wiki.scribus.net
> http://forums.scribus.net
>



-- 
Gruß, Stefan



More information about the scribus mailing list