[scribus] Binary location // Re: CMake Error (variables not found)

Craig Bradney cbradney at scribus.info
Wed Oct 10 09:11:22 UTC 2018


Did you make install?

> On 10 Oct 2018, at 09:50, David Burleigh <david.burleigh at saphar.net> wrote:
> 
>> On Wed, 2018-10-10 at 09:03 +0200, Jonas Bechtel wrote:
>> On Tue, 09 Oct 2018 17:11:02 -0400David Burleigh <
>> david.burleigh at saphar.net> wrote with subject"Re: [scribus] CMake
>> Error (variables not found)":
>>>> On Tue, 2018-10-09 at 12:52 -0400, Gregory Pittman wrote:
>>>>> On 10/09/2018 11:28 AM, David Burleigh wrote:  
>>>>> I've been working my way through resolving all the
>>>>> dependencies tobuild Scribus 1.5.4 on my Debian Testing
>>>>> system, but have gottento a place where I don't know how to
>>>>> proceed. Below is the resultof my latest attempt. I would
>>>>> appreciate any help in getting pastthis point.zerubbabel at dz:~/
>>>>> bin/scribus-1.5.4/build$ /usr/bin/cmake ..-
>>>>> DCMAKE_INSTALL_PREFIX:PATH=/home/zerubbabel/scribus-1.5.4/--
>>>>> Shared Library Flags: -- Scribus 1.5.4 will be built and
>>>>> installed into/home/zerubbabel/scribus-1.5.4-- Machine:
>>>>> x86_64-linux-gnu, void pointer size: 8-- Found target X86_64--
>>>>> Building for target x86_64-linux-gnu-- Using standard
>>>>> ApplicationDataDir. You can change it with-
>>>>> DAPPLICATION_DATA_DIR-- Using standard ApplicationConfigDir.
>>>>> You can change it with-DAPPLICATION_CONFIG_DIR-- ----- USE QT
>>>>> 5------- ----- USE QT Widgets------- ----- USE Qt5Gui -------
>>>>> ----- USE QT 5 XML ------- ----- USE Qt5Network ------- -----
>>>>> USE Qt5OpenGL ------- ----- USE Qt5LinguistTools ------- -----
>>>>> USE Qt5PrintSupport ------- Qt VERSION: 5.11.1-- Your Qt
>>>>> version is 5.7.0 or superior, enabling C++11 compilerfeatures-
>>>>> - Enabling C++11 compiler featuresZLIB Library Found OKNo OSG
>>>>> found, building without 3D ExtensionJPEG Library Found OKTIFF
>>>>> Library Found OKPython Library Found OK-- FreeType2 Library
>>>>> Found OKCAIRO Library Found OKCUPS Library Found OKLIBXML2
>>>>> Library Found OKLCMS 2 ReleaseLibrary: /usr/lib/x86_64-linux-
>>>>> gnu/liblcms2.soLCMS 2 Debug Library: LCMS2_LIBRARY_DEBUG-
>>>>> NOTFOUNDLCMS 2 Library: /usr/lib/x86_64-linux-
>>>>> gnu/liblcms2.soLittleCMS-2 Library Found OKFontConfig Found
>>>>> OK-- New HUNSPELL API foundHunspell Found OKOpenSSL found OK
>>>>> for installed version of PoDoFo (>= 0.9.5) -Enabling support
>>>>> for PDF embedded in AIPoDoFo found OK-- Boost version:
>>>>> 1.62.0Boost Library Found OKBuilding without GraphicksMagick
>>>>> (use -DWANT_GRAPHICSMAGICK=1 toenable)-- Found poppler-- Found
>>>>> poppler libs: /usr/lib/x86_64-linux-gnu/libpoppler.so-- Found
>>>>> poppler includes: POPPLER_INCLUDE_DIR-NOTFOUND-- Including
>>>>> OpenSSL files for PoDoFo >= 0.9.5CMake Deprecation Warning at
>>>>> scribus/CMakeLists.txt:1203(cmake_policy):  The OLD behavior
>>>>> for policy CMP0003 will be removed from afuture version  of
>>>>> CMake.
>>>>>  The cmake-policies(7) manual explains that the OLD behaviors
>>>>> ofall policies are deprecated and that a policy should be set
>>>>> toOLD only under  specific short-term circumstances.  Projects
>>>>> should be portedto the NEW  behavior and not rely on setting a
>>>>> policy to OLD.
>>>>> 
>>>>> RPATH: lib/scribus/plugins/;
>>>>> --
>>>>> Qt5::CoreQt5::WidgetsQt5::GuiQt5::XmlQt5::NetworkQt5::OpenGL/u
>>>>> sr/lib/x86_64-linux-gnu/libxml2.so/usr/lib/x86_64-linux-
>>>>> gnu/libz.soBuilding Corel Draw Importer with
>>>>> librevengeBuilding Freehand Importer with librevengeBuilding
>>>>> Pagemaker Importer with librevengeBuilding MS Publisher
>>>>> Importer with librevengeBuilding QuarkXPress ImporterBuilding
>>>>> MS-Visio Importer with librevengeBuilding Zoner Draw Importer-
>>>>> - Building with Scripter 1-- No source header files will be
>>>>> installed-- /home/zerubbabel/bin/scribus-
>>>>> 1.5.4/resources/translations-- The following GUI languages
>>>>> will be installed: CMake Error: The following variables are
>>>>> used in this project, butthey are set to NOTFOUND.Please set
>>>>> them or make sure they are set and tested correctly inthe
>>>>> CMake files:POPPLER_INCLUDE_DIR   used as include directory in
>>>>> directory/home/zerubbabel/bin/scribus-
>>>>> 1.5.4/scribus/plugins/import/pdf   used as include directory
>>>>> in directory/home/zerubbabel/bin/scribus-
>>>>> 1.5.4/scribus/plugins/import/pdf   used as include directory
>>>>> in directory/home/zerubbabel/bin/scribus-
>>>>> 1.5.4/scribus/plugins/import/pdf   used as include directory
>>>>> in directory/home/zerubbabel/bin/scribus-
>>>>> 1.5.4/scribus/plugins/import/pdf   used as include directory
>>>>> in directory/home/zerubbabel/bin/scribus-
>>>>> 1.5.4/scribus/plugins/import/pdf   used as include directory
>>>>> in directory/home/zerubbabel/bin/scribus-
>>>>> 1.5.4/scribus/plugins/import/pdf   used as include directory
>>>>> in directory/home/zerubbabel/bin/scribus-
>>>>> 1.5.4/scribus/plugins/import/pdf   used as include directory
>>>>> in directory/home/zerubbabel/bin/scribus-
>>>>> 1.5.4/scribus/plugins/import/pdf   used as include directory
>>>>> in directory/home/zerubbabel/bin/scribus-
>>>>> 1.5.4/scribus/plugins/import/pdf
>>>>> -- Configuring incomplete, errors occurred!See also
>>>>> "/home/zerubbabel/bin/scribus-
>>>>> 1.5.4/build/CMakeFiles/CMakeOutput.log".See also
>>>>> "/home/zerubbabel/bin/scribus-
>>>>> 1.5.4/build/CMakeFiles/CMakeError.log".zerubbabel at dz:~/bin/scr
>>>>> ibus-1.5.4/build$  
>>>> 
>>>> I think what it's saying is that it couldn't find poppler. Note
>>>> thatthere are 3 different popplers that you need:popplerpoppler-
>>>> datapoppler-cpp
>>>> which means you need not only these, but the development
>>>> packages.In Fedora, this would be poppler-devel, poppler-data-
>>>> devel, andpoppler-cpp-devel, so it's whatever the equivalent
>>>> names are forDebian.
>>>> Greg  
>>> 
>>> Well, now the CMake completed without errors, and make
>>> completedwithout errors, and make install completed without
>>> errors, but theredoesn't seem to be any scribus executable
>>> anywhere. 
>> 
>> Despite the fact that you found the precompiled package, just for
>> completeness:
>> I would expect the binary to be named as ~/bin/scribus-
>> 1.5.4/build/scribus/scribus
>> Did you try to $ find ~/bin/scribus-1.5.4/ -name scribus?
> Yes, that's where I expected to find it, but it was not there. I
> searched visibly, and with "find" but to no avail. It is odd.
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.scribus.net/pipermail/scribus/attachments/20181010/2642be66/attachment.html>
> ___
> Scribus Mailing List: scribus at lists.scribus.net
> Edit your options or unsubscribe:
> http://lists.scribus.net/mailman/listinfo/scribus
> See also:
> http://wiki.scribus.net
> http://forums.scribus.net




More information about the scribus mailing list