[Scribus] How to print?

avox avox
Mon Jun 4 17:50:46 CEST 2007

BandiPat-2 wrote:
> I don't know if this will be of any help to you or not.  I'm posting the 
> info from the CUPS log for the last test I just did.
> I [04/Jun/2007:10:17:03 -0400] Adding start banner page "none" to job 84.
> I [04/Jun/2007:10:17:03 -0400] Adding end banner page "none" to job 84.
> I [04/Jun/2007:10:17:03 -0400] Job 84 queued on 
> "EPSON_Stylus_Photo_R220_USB_2" by "tracerb".
> I [04/Jun/2007:10:17:03 -0400] Started filter 
> /usr/lib/cups/filter/pstops (PID 1253) for job 84.
> I [04/Jun/2007:10:17:03 -0400] Started filter 
> /usr/lib/cups/filter/pstoraster (PID 1254) for job 84.
> I [04/Jun/2007:10:17:03 -0400] Started filter 
> /usr/lib/cups/filter/rastertogutenprint.5.1 (PID 1255) for job 84.
> I [04/Jun/2007:10:17:03 -0400] Started backend /usr/lib/cups/backend/usb 
> (PID 1256) for job 84.

Can your switch on the "debug" mode in the LogLevel directive for your CUPS
Edit /etc/cups/cupsd.conf (or wherever this configuration file is installed
in your case) to have the line "LogLevel debug" there. Then restart your
CUPS daemon /etc/software/init.d/cups start (the command may be customized
by your Linux distribution).

> It seems it's sending the job or a job to CUPS successfully, but what's 
> it is sending appears to be blank, thus the blank pages?  Although it 
> does seem that the tmp.ps file is intact and the correct job/page. 
> Hopefully that will be helpful to you.  I'll test more later, but right 
> now, I don't seem to be getting any errors showing up in the logs and 
> that may be because there are none. 

Or because CUPS suppresses these warnings.

I'm still interested what CUPS options you set as default when printing from 
Scribus. That's the 'Options' button right next to the field where you
the printer name.


View this message in context: http://www.nabble.com/How-to-print--tf3844346.html#a10952420
Sent from the Scribus mailing list archive at Nabble.com.

More information about the scribus mailing list