[Scribus] SUSE 10.0

[John B]

This is the typical behavior I have observed when using checkinstall to
install Qt-based or KDE-based applications. There are two workarounds I'm
aware of for this:

1) Run make install then run checkinstall to create the package. This will
get past the error messages.

2) Run make install
DESTDIR=/some/directory/from/which/you/will/package/the/program, then use
your distro's packaging tools to create the package.

HTH,
John

On 1/27/06, Sjoerd Hiemstra <shiems146 at kpnplanet.nl> wrote:
>
> Hi,
>
> I took the tar.bz2 to install 1.3.2 on SUSE 10.0.
> './configure' and 'make' both seemed to run fine.
> I used checkinstall instead of 'make install'.
> These installation results are taken from the output of checkinstall.
> Any opinions?
>
> ======================== Installation results==========================
> Makefile:845: warning: overriding commands for target `clean-bcheck'
> Makefile:811: warning: ignoring old commands for target `clean-bcheck'
> Makefile:850: warning: overriding commands for target `bcheck-am'
> Makefile:816: warning: ignoring old commands for target `bcheck-am'
> Making install in scribus
> make[1]: Entering directory `/home/sh/scribus-1.3.2/scribus'
> Making install in libart
> make[2]: Entering directory `/home/sh/scribus-1.3.2/scribus/libart'
> make[3]: Entering directory `/home/sh/scribus-1.3.2/scribus/libart'
> make[3]: Nothing to be done for `install-exec-am'.
> make[3]: Nothing to be done for `install-data-am'.
> make[3]: Leaving directory `/home/sh/scribus-1.3.2/scribus/libart'
> make[2]: Leaving directory `/home/sh/scribus-1.3.2/scribus/libart'
> Making install in pixbuf
> make[2]: Entering directory `/home/sh/scribus-1.3.2/scribus/pixbuf'
> make[3]: Entering directory `/home/sh/scribus-1.3.2/scribus/pixbuf'
> make[3]: Nothing to be done for `install-exec-am'.
> make[3]: Nothing to be done for `install-data-am'.
> make[3]: Leaving directory `/home/sh/scribus-1.3.2/scribus/pixbuf'
> make[2]: Leaving directory `/home/sh/scribus-1.3.2/scribus/pixbuf'
> Making install in dicts
> make[2]: Entering directory `/home/sh/scribus-1.3.2/scribus/dicts'
> make[3]: Entering directory `/home/sh/scribus-1.3.2/scribus/dicts'
> make[3]: Nothing to be done for `install-exec-am'.
> /bin/sh ../../admin/mkinstalldirs /usr/local/lib/scribus/dicts/
> mkdir -p -- /usr/local/lib/scribus/dicts/
> /usr/bin/install -c -p -m 644 ./hyph_af.dic
>    /usr/local/lib/scribus/dicts/hyph_af.dic
> /usr/bin/install: preserving times for
>    `/usr/local/lib/scribus/dicts/hyph_af.dic': No such file or directory
> /usr/bin/install: cannot set time stamps for
>    `/usr/local/lib/scribus/dicts/hyph_af.dic': No such file or directory
> make[3]: *** [install-data-local] Error 1
> make[3]: Leaving directory `/home/sh/scribus-1.3.2/scribus/dicts'
> make[2]: *** [install-am] Error 2
> make[2]: Leaving directory `/home/sh/scribus-1.3.2/scribus/dicts'
> make[1]: *** [install-recursive] Error 1
> make[1]: Leaving directory `/home/sh/scribus-1.3.2/scribus'
> make: *** [install-recursive] Error 1
>
> ****  Installation failed. Aborting package creation.
>
> Cleaning up...OK
>
> Bye.
> _______________________________________________
> Scribus mailing list
> Scribus at nashi.altmuehlnet.de
> http://nashi.altmuehlnet.de/mailman/listinfo/scribus
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://nashi.altmuehlnet.de/pipermail/scribus/attachments/20060127/d6d0a9ca/attachment.html