r18520 by gpittman - further tag fixes and appearance improvements for 150 manual

scribus-commit scribus-commit at lists.scribus.net
Sun Sep 29 14:02:46 UTC 2013 

Author: gpittman
Date: Sun Sep 29 14:02:46 2013
New Revision: 18520

URL: http://scribus.net/websvn/listing.php?repname=Scribus&sc=1&rev=18520
Log:
further tag fixes and appearance improvements for 150 manual

Modified:
    trunk/Scribus/doc/en/WwImages.html
    trunk/Scribus/doc/en/WwText.html
    trunk/Scribus/doc/en/collect4output.html
    trunk/Scribus/doc/en/colorwheel.html
    trunk/Scribus/doc/en/images/duotone-imp.png
    trunk/Scribus/doc/en/images/duotone-imp2.png
    trunk/Scribus/doc/en/importhints.html
    trunk/Scribus/doc/en/importhints1.html
    trunk/Scribus/doc/en/importhints2.html
    trunk/Scribus/doc/en/importhints4.html
    trunk/Scribus/doc/en/manual.css
    trunk/Scribus/doc/en/psd.html

Modified: trunk/Scribus/doc/en/WwImages.html
URL: http://scribus.net/websvn/diff.php?repname=Scribus&rev=18520&path=/trunk/Scribus/doc/en/WwImages.html
==============================================================================
--- trunk/Scribus/doc/en/WwImages.html (original)
+++ trunk/Scribus/doc/en/WwImages.html Sun Sep 29 14:02:46 2013
@@ -43,14 +43,14 @@
 edits happen in a nondestructive way, i.e., the source file is not
 altered.</li>
 <li><b>Edit Image</b> starts your image editor as set in the File->Preferences->External Tools and loads the image.</li>
-<li><b>Attributes</b> will not be discussed here.
-</li><li><b>Is Locked</b> locks the frame’s position, size, and content.
-</li><li><b>Size is Locked</b> locks only the size. Frame and image can otherwise be moved and edited.</li>
+<li><b>Attributes</b> will not be discussed here.</li>
+<li><b>Is Locked</b> locks the frame’s position, size, and content.</li>
+<li><b>Size is Locked</b> locks only the size. Frame and image can otherwise be moved and edited.</li>
 <li><b>Send to Scrapbook</b> and <b>Send to Patterns</b> will not be covered here, except to say that these allow for saving content to be shared among documents.</li>
 <li><b>Level</b> allows you to move the frame up or down levels on the
 current layer. If your document has more than one layer, there will
 also be an item <b>Send to Layer</b> to allow moving the frame to a different layer.</li>
-<li><b>Convert to</b> gives you the following sub-choices:
+<li><b>Convert to</b> gives you the following sub-choices:</li>
 <ul><li><b>Polygon</b>, converts to a polygon, with apparent loss of your image, recoverable with Convert to Image Frame.</li>
 <li><b>Text Frame</b> converts to that kind of frame, in which case
 your image becomes invisible, but will be restored if you convert back

Modified: trunk/Scribus/doc/en/WwText.html
URL: http://scribus.net/websvn/diff.php?repname=Scribus&rev=18520&path=/trunk/Scribus/doc/en/WwText.html
==============================================================================
--- trunk/Scribus/doc/en/WwText.html (original)
+++ trunk/Scribus/doc/en/WwText.html Sun Sep 29 14:02:46 2013
@@ -56,14 +56,14 @@
 <li>At the top, <b>Info</b> gives information about the content of the frame, statistics on number of paragraphs, lines, and so forth, and also whether this frame is set to print, which also applies to whether it will be included in PDF export.</li>
 <li><b>Undo</b> will undo the last operation on the frame. <b>Redo</b> is available when some operation has been undone.</li>
 <li><b>Get Text</b> and <b>Append Text</b> allow for importation of text data from a file.</li>
-<li><b>Edit Text</b> brings up the Story Editor</b>
+<li><b>Edit Text</b> brings up the Story Editor</b></li>
 <li><b>Sample Text</b> allows for importing so-called <a href="lipsum.html">Lorem ipsum</a> text, not only in the original (pseudo-)Latin, but also many other languages. A dialog comes up for choice of the language and amount of sample text to create.</li>
 <li><b>Attributes</b> and <b>PDF Options</b> are advanced features not covered here.</li>
 <li><b>Is Locked</b> will lock all characteristics of a frame, such as position, size, and contents. It cannot be deleted, but can be copied and pasted, and the copy will also be locked. If you Duplicate a locked frame, the duplication will not be locked.</li>
 <li><b>Size is Locked</b>, as the name suggests, only locks the size of the frame.</li>
 <li><b>Send to Scrapbook</b> and <b>Send to Patterns</b> will not be covered here, except to say that this allows for saving content to be shared among documents.</li>
 <li><b>Level</b> allows you to move the frame up or down levels on the current layer. If your document has more than one layer, there will also be an item <b>Send to Layer</b> to allow moving the frame to a different layer.</li>
-<li><b>Convert to</b> gives you the following sub-choices:
+<li><b>Convert to</b> gives you the following sub-choices:</li>
 <ul><li><b>Image Frame</b> converts to that kind of frame, in which case your text becomes invisible, but will be restored if you convert back to a text frame. You cannot show text and an image together, except where text is incorporated in an image. Use a superimposed text frame to apply text over an image.</li>
 <li><b>Outlines</b> transforms the glyphs (characters) into vector graphics, which are then grouped. <i>Some caution is advised here, since even though there seems to be an option to convert back to a text frame, this will not allow editing of the text. Best to Undo back to before the text to outlines conversion, but you must do this with the toolbar Undo or Ctrl+Z.</i></li>
 <li><b>Polygon</b>, like Image Frame, converts to a polygon, with apparent loss of text, recoverable with Convert to Text Frame.</li>

Modified: trunk/Scribus/doc/en/collect4output.html
URL: http://scribus.net/websvn/diff.php?repname=Scribus&rev=18520&path=/trunk/Scribus/doc/en/collect4output.html
==============================================================================
--- trunk/Scribus/doc/en/collect4output.html (original)
+++ trunk/Scribus/doc/en/collect4output.html Sun Sep 29 14:02:46 2013
@@ -26,14 +26,14 @@
 </table>
 <h3>The Result</h3>
 
-<table cellpadding="3" width="80%">
+<table cellpadding="3" width="100%">
 <tr><td><img src="images/collect_out3.png"></td>
-<td><p>This is a listing of what Scribus has put inside this directory. We see various images, our font files ending in <code>.ttf</code>, and the ICC profiles ending in <code>.icm</code>, in addition to the document <code>conference_present.sla</code>.</p>
+<td valign="top"><p>This is a listing of what Scribus has put inside this directory. We see various images, our font files ending in <code>.ttf</code>, and the ICC profiles ending in <code>.icm</code>, in addition to the document <code>conference_present.sla</code>.</p>
 <p>What has happened in Scribus is that you are now working with this new copy of the document, with its content here, instead of the original file and its content, however scattered it might have been. Open this file as you would any other document, by going to its directory and selecting the file.</p>
 <p>Conceptually you can see how this makes passing this back and forth between collaborators much more efficient. Also consider that you might choose to use Collect for Output to create several versions, with variations on the images for example, by repeating the Collect for Output procedure to some other directory.</p></td></tr>
 </table>
 <h3>Avoiding Trouble</h3>
-<table cellpadding="3" width="80%">
+<table cellpadding="3" width="100%">
 <tr><td><p>Something you need to be careful about is moving or deleting any of these files outside of Scribus. To understand why this is, look at what happens.</p>
 <p>On the right is a depiction of our original situation, before running <i>Collect for Output</i>, where we have the Scribus document saved in one directory, and then perhaps images scattered around in others. When we run <i>Collect for Output</i>, all of these files are still in these locations.</p>
 <p>For each image, Scribus only has a relative path listed when you save the document – relative to where the <code>.sla</code> is saved.</p>

Modified: trunk/Scribus/doc/en/colorwheel.html
URL: http://scribus.net/websvn/diff.php?repname=Scribus&rev=18520&path=/trunk/Scribus/doc/en/colorwheel.html
==============================================================================
--- trunk/Scribus/doc/en/colorwheel.html (original)
+++ trunk/Scribus/doc/en/colorwheel.html Sun Sep 29 14:02:46 2013
@@ -35,31 +35,32 @@
 
 <table width="80%" cellpadding="5">
 <tr><td><p><b>Analogous:</b></p></td></tr>
-<tr><td align="center"><img src="images/cw-analogous_20.png" title="The Color Wheel dialog" alt="The Color Wheel dialog"/><br />Angle = 20
-<p><img src="images/cw-analogous_30.png" title="The Color Wheel dialog" alt="The Color Wheel dialog"/><br />Angle = 30</td>
+<tr><td align="center"><p><img src="images/cw-analogous_20.png" title="The Color Wheel dialog" alt="The Color Wheel dialog"/><br />Angle = 20</p>
+<p><img src="images/cw-analogous_30.png" title="The Color Wheel dialog" alt="The Color Wheel dialog"/><br />Angle = 30</p></td>
 <td align="left" rowspan="2"><p>The analogous color scheme creates color harmonies by using neighboring colors in the color wheel. These colors should be pleasing together when the angle is small, and offer increasing contrast as you increase the angle.</p>
 <p>In these images, our base color is the farthest to the right.</p></td>
 </tr>
 <tr><td><p><b>Complementary:</b></p></td</tr>
-<tr><td align="center"><img src="images/cw-complementary.png" title="The Color Wheel dialog" alt="The Color Wheel dialog"/><br />Base color to the left</td>
+<tr><td align="center"><p><img src="images/cw-complementary.png" title="The Color Wheel dialog" alt="The Color Wheel dialog"/><br />Base color to the left</p></td>
 <td align="left"><p>Complementary colors are colors opposite to each other on the Color Wheel, so here we have a fixed angle of 180°. Their best use is for creating strong contrasts between larger areas, but they should not be used together as text and text background colors.</p></td>
 </tr>
 <tr><td><p><b>Split Complementary:</b></p></td></tr>
-<tr><td align="center"><img src="images/cw-splitcompl_20.png" title="The Color Wheel dialog" alt="The Color Wheel dialog"/><br />Angle = 20
-<p><img src="images/cw-splitcompl_40.png" title="The Color Wheel dialog" alt="The Color Wheel dialog"/><br />Angle = 40</td>
+<tr><td align="center"><p><img src="images/cw-splitcompl_20.png" title="The Color Wheel dialog" alt="The Color Wheel dialog"/><br />Angle = 20</p>
+<p><img src="images/cw-splitcompl_40.png" title="The Color Wheel dialog" alt="The Color Wheel dialog"/><br />Angle = 40</p></td>
 <td align="left"><p>The base color is farthest to the right.<br />This is in essence a combination of Analogous and Complementary. The first two colors (left to right) are analogous to the base color, separated by our chosen angle. The next two colors are complementary to each of these analogous colors.</p></td>
 </tr>
 <tr><td><p><b>Triadic:</b></p></td></tr>
-<tr><td align="center"><img src="images/cw-triadic.png" title="The Color Wheel dialog" alt="The Color Wheel dialog"/><br />Base color to the right</td>
+<tr><td align="center"><p><img src="images/cw-triadic.png" title="The Color Wheel dialog" alt="The Color Wheel dialog"/><br />Base color to the right</p></td>
 <td align="left"><p>Another simple fixed scheme, with the three colors 120° apart.</p></td>
 </tr>
 <tr><td><p><b>Tetradic (Double Complementary)</b></p></td></tr>
-<tr><td align="center"><img src="images/cw-tetradic_20.png" title="The Color Wheel dialog" alt="The Color Wheel dialog"/><br />Angle = 20
-<p><img src="images/cw-tetradic_40.png" title="The Color Wheel dialog" alt="The Color Wheel dialog"/><br />Angle = 40</td>
+<tr><td align="center"><p><img src="images/cw-tetradic_20.png" title="The Color Wheel dialog" alt="The Color Wheel dialog"/><br />Angle = 20</p>
+<p><img src="images/cw-tetradic_40.png" title="The Color Wheel dialog" alt="The Color Wheel dialog"/><br />Angle = 40</p></td>
 <td align="left"><p>The base color is farthest to the right.<br />Here we have a single analogous color (second from the left), separated by our chosen angle, then corresponding complementary colors (first and third colors). Note that one complementary color pair is the first and fourth, and the other pair is the second and third.</p></td>
 </tr></table>
 <h4>Making Use of These Schemes</h4>
 <p>With so many schemes and variations in settings, obviously there is no automatic answer to choosing which is best for you. One way to learn is to look at advertisements, web pages, or other examples of pleasing design, and pay attention to their color schemes, noting which seem to work well, and which do not. There are good uses for similar colors and for contrasting colors, and most designs have each in various areas of the page.</p>
+<p>You might have a look at the <a href="color7c.html" alt="Galaxy Color Emotions">Galaxy Emotional Color Tool</a>â„¢ elsewhere in the manual as an example.</p>
 <h4>Adding Color Harmonies to the Document Colors</h4>
 <p>In the lower right section of the Color Wheel dialog, you can see the “Result Colors” in all three color models. Unfortunately, the names of the colors in the new scheme will be created automatically, and there’s no way to rename them in the Color Wheel dialog. Thus, you will have to <a href="color1.html">rename</a> these colors via <i>Edit > Colors</i> if you either want to use several color harmonies in your document or make sure that the colors of your scheme are listed next to each other in color dialogs.</p>
 <p>At the bottom of the dialog you can see two options for adding your color scheme to the document colors: “Merge” and “Replace.”</p>

Modified: trunk/Scribus/doc/en/images/duotone-imp.png
URL: http://scribus.net/websvn/diff.php?repname=Scribus&rev=18520&path=/trunk/Scribus/doc/en/images/duotone-imp.png
==============================================================================
Binary files - no diff available.

Modified: trunk/Scribus/doc/en/images/duotone-imp2.png
URL: http://scribus.net/websvn/diff.php?repname=Scribus&rev=18520&path=/trunk/Scribus/doc/en/images/duotone-imp2.png
==============================================================================
Binary files - no diff available.

Modified: trunk/Scribus/doc/en/importhints.html
URL: http://scribus.net/websvn/diff.php?repname=Scribus&rev=18520&path=/trunk/Scribus/doc/en/importhints.html
==============================================================================
--- trunk/Scribus/doc/en/importhints.html (original)
+++ trunk/Scribus/doc/en/importhints.html Sun Sep 29 14:02:46 2013
@@ -18,7 +18,7 @@
 <p>One of the things you must be aware of when using Scribus is the difference between a bitmap image and a vector image. A bitmap image consists of a fixed number of colored dots (pixels). This means (among other things) that such an image has a certain resolution, i.e., a number of dots within a two-dimensional area (a square). As a consequence, the resolution of a bitmap image has a major influence on the quality of its reproduction in different media, because the bigger the display area is, the bigger the dots and the uglier the result. Thus, image resolution is one of the things you have to be aware of when you are creating files for commercial printing.</p>
 <p>Vector images, on the other hand, use mathematical (geometrical) formulas to describe the content in terms of lines and curves, which means that those images (henceforth referred to as “vector drawings” or simply “drawings”) can be enlarged almost endlessly without losing quality. It should be mentioned, though, that there are several methods to describe graphics geometrically, and not all are equal. As a general rule, <a href="importhints1.html">PostScript-based</a> drawings (EPS, AI) offer the most sophisticated vector model with superior quality even at building-sized displays. This is also true for <a href="fonts2.html">PostScript fonts</a>, including OpenType fonts. Slightly lower quality is provided by <a href="scribus-svg.html">SVG</a> drawings, and the difference between PostScript or SVG and formats like WMF, ODG or PICT is even larger. In many cases, however, these differences in quality are irrelevant, as they can only be perceived at v!
 ery high magnification levels.</p>
 <table width="100%"><tr><td align="center"><img src="images/vector-clipart.png"></td></tr>
-<tr><td align="center"><img src="images/vector-advanced.png"></td></tr> <tr><td align="center"><i>Differences in quality between clipart formats (top: WMF and ODG) and more advanced <br> vector formats (bottom: SVG and EPS), viewed at zoom level 3000 % in Scribus</i></td></tr></table>
+<tr><td align="center"><img src="images/vector-advanced.png"></td></tr> <tr><td align="center"><p><i>Differences in quality between clipart formats (top: WMF and ODG) and more advanced <br> vector formats (bottom: SVG and EPS), viewed at zoom level 3000 % in Scribus</i></p></td></tr></table>
 <p>If you're still unsure about the difference between a vector and a bitmap image, there is an example that you can see for yourself. Go to: <a href="http://www.isc.tamu.edu/~lewing/linux">http://www.isc.tamu.edu/~lewing/linux</a>, get the linked PostScript file, which is an EPS version of Tux and then right-click and download one of the GIFs. They are about the same in file size. Now create a new document in Scribus with two pages. Place the GIF on one page and then the EPS file on another and export a PDF. Then open the PDF in Adobe Reader, zoom in 200–400 %. Now you should see the difference …</p>
 </body>
 </html>

Modified: trunk/Scribus/doc/en/importhints1.html
URL: http://scribus.net/websvn/diff.php?repname=Scribus&rev=18520&path=/trunk/Scribus/doc/en/importhints1.html
==============================================================================
--- trunk/Scribus/doc/en/importhints1.html (original)
+++ trunk/Scribus/doc/en/importhints1.html Sun Sep 29 14:02:46 2013
@@ -49,10 +49,10 @@
 </li>
 <li>Many EPS files that contain beautiful artwork look like they consist exclusively of vector data. However, if you take a closer look, you will notice that more often than not a “vector” drawing actually contains bitmap files as well. There can be many reasons for the inclusion of bitmap files in EPS “drawings”. For example, an artist using Illustrator may have worked with bitmap design elements for performance reasons (using hundreds of vector elements requires much more computing power). Another reason may be that the program that created the EPS has some artistic features that cannot be “translated” into PostScript, so certain vector elements had to be converted to bitmaps. Also note that many design templates for fliers or postcards combine vector data, bitmaps and fonts into a single file, simply because EPS files can be read by many drawing and page layout programs.<br>
 If you are working with this kind of “mixed” EPS, you need to be very careful! First, when such a file is being imported into Scribus, Ghostscript will convert every single bitmap in the source file into a format that can be read by Scribus. This may take quite some time, but more importantly, Ghostscript will save every converted bitmap on your hard disk in your home directory, and depending on the content of the source EPS, you may run out of disk space faster than you can imagine! Since Scribus files are plain text and do not store any bitmap data, you will also have to distribute all the converted bitmap files with your SLA file if you want to edit or output the file on another computer. To find the required files, look for files with the name of the original EPS and the file extensions PNG, TIF(F), PSD and DAT (the DAT files are so-called “raw” bitmaps). This can be quite cumbersome, and you can make your life easier by using <i>File > Collect f!
 or Output</i>.<br><br>
-<table border="1" align="center">
+<table border="1" align="center" cellpadding="8" cellspacing="0" bordercolor="#888888">
   <tbody>
     <tr>
-      <td><span style="color: red;">A special note for LaTeX users: If your LaTeX file uses bitmap fonts and you create an EPS or PostScript file from your LaTeX source, Ghostscript will create a bitmap for each glyph during import into Scribus, which may result in hundreds or even thousands of tiny bitmaps. If you really need to use a bitmap font, you should either consider using a Scribus <a href="renderframes.html">Render Frame</a> or loading the EPS/PS file into an image frame.</span></td>
+      <td><span style="color: #cc0000;"><p>A special note for LaTeX users: If your LaTeX file uses bitmap fonts and you create an EPS or PostScript file from your LaTeX source, Ghostscript will create a bitmap for each glyph during import into Scribus, which may result in hundreds or even thousands of tiny bitmaps. If you really need to use a bitmap font, you should either consider using a Scribus <a href="renderframes.html">Render Frame</a> or loading the EPS/PS file into an image frame.<p></span></td>
     </tr>
   </tbody>
 </table>

Modified: trunk/Scribus/doc/en/importhints2.html
URL: http://scribus.net/websvn/diff.php?repname=Scribus&rev=18520&path=/trunk/Scribus/doc/en/importhints2.html
==============================================================================
--- trunk/Scribus/doc/en/importhints2.html (original)
+++ trunk/Scribus/doc/en/importhints2.html Sun Sep 29 14:02:46 2013
@@ -41,7 +41,7 @@
       <td align="center"><img src="images/vectimp4.png" title="The item “path13122” has been detached from the group “svg1061”, an imported SVG file." alt="The item “path13122” has been detached from the group “svg1061”, an imported SVG file." /></td>
     </tr>
     <tr>
-      <td><div align="center"><i>The item “path13122” has been detached from the group “svg1061”, an imported SVG file."</i></div></td>
+      <td><div align="center"><p><i>The item “path13122” has been detached from the group “svg1061”, an imported SVG file."</i></p></div></td>
     </tr>
   </tbody>
 </table>
@@ -56,7 +56,7 @@
       <td align="center"><img src="images/vectimp5.png" title="Xfig uses a name for every color, and Scribus will import the named colors." alt="Xfig uses a name for every color, and Scribus will import the named colors." /></td>
     </tr>
     <tr>
-      <td><div align="center"><i>Xfig uses a name for every color, and Scribus will import the named colors.</i></div></td>
+      <td><div align="center"><p><i>Xfig uses a name for every color, and Scribus will import the named colors.</i></p></div></td>
     </tr>
   </tbody>
 </table>

Modified: trunk/Scribus/doc/en/importhints4.html
URL: http://scribus.net/websvn/diff.php?repname=Scribus&rev=18520&path=/trunk/Scribus/doc/en/importhints4.html
==============================================================================
--- trunk/Scribus/doc/en/importhints4.html (original)
+++ trunk/Scribus/doc/en/importhints4.html Sun Sep 29 14:02:46 2013
@@ -21,7 +21,7 @@
 <li>www. style web links are converted to text with blue coloring to highlight them in the same manner as most web browsers do in their default settings.</li>
 <li>b, u, i, em, strong,sub.sup,del,u - Text formatting is converted to the corresponding font styles. Note, your default font should have all of these variants available to Scribus. </li>
 </ul>
-Hence the following section of html will display and create paragraph styles in Scribus as demonstrated below.
+<p>Hence the following section of html will display and create paragraph styles in Scribus as demonstrated below.</p>
 <pre>
 <?xml version="1.0" encoding="utf-8"?>
 <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"

Modified: trunk/Scribus/doc/en/manual.css
URL: http://scribus.net/websvn/diff.php?repname=Scribus&rev=18520&path=/trunk/Scribus/doc/en/manual.css
==============================================================================
--- trunk/Scribus/doc/en/manual.css (original)
+++ trunk/Scribus/doc/en/manual.css Sun Sep 29 14:02:46 2013
@@ -6,5 +6,6 @@
 p, blockquote {font-family:dejavu sans,sans-serif; font-size:0.8em;}
 li {font-family:dejavu sans,sans-serif; font-size:0.8em;}
 code {font-size:1.1em;}
+p > code {font-size:1.2em;}
 dl {font-family:dejavu sans, sans-serif; font-size:1em;}
 pre {font-size:0.9em;}

Modified: trunk/Scribus/doc/en/psd.html
URL: http://scribus.net/websvn/diff.php?repname=Scribus&rev=18520&path=/trunk/Scribus/doc/en/psd.html
==============================================================================
--- trunk/Scribus/doc/en/psd.html (original)
+++ trunk/Scribus/doc/en/psd.html Sun Sep 29 14:02:46 2013
@@ -45,7 +45,7 @@
 <table width="100%">
 <tr><td align="center"><img src="images/duotone-imp.png" /></td></tr>
 <tr><td align="center"><img src="images/duotone-imp2.png" /></td></tr>
-<tr><td><i><div align="center">Duotone import: Scribus will indicate the Duotone “color space” in the import dialog (top) and load used spot colors into the color list (bottom right). <br>In the Image Effects dialog, the “Duotone” effect will be activated automatically (bottom left).</div></i></td></tr>
+<tr><td align="center"><p><i>Duotone import: Scribus will indicate the Duotone “color space” in the import dialog (top)<br /> and load used spot colors into the color list (bottom right). <br>In the Image Effects dialog, the “Duotone” effect will be activated automatically (bottom left).</i></p></td></tr>
 </table>
 <br>
 <h3>Recommendations</h3>

More information about the scribus-commit mailing list