r18476 by gpittman - edit to settings1.html in manual

[scribus-commit]

Author: gpittman
Date: Sat Sep 14 00:12:44 2013
New Revision: 18476

URL: http://scribus.net/websvn/listing.php?repname=Scribus&sc=1&rev=18476
Log:
edit to settings1.html in manual

Modified:
    trunk/Scribus/doc/en/settings1.html

Modified: trunk/Scribus/doc/en/settings1.html
URL: http://scribus.net/websvn/diff.php?repname=Scribus&rev=18476&path=/trunk/Scribus/doc/en/settings1.html
==============================================================================
--- trunk/Scribus/doc/en/settings1.html (original)
+++ trunk/Scribus/doc/en/settings1.html Sat Sep 14 00:12:44 2013
@@ -83,6 +83,10 @@
 <tr><td align="center"><img src="images/prefs_tools5.png">
 <td align="center"><img src="images/prefs_tools6.png" alt="Tools Tab Panel"/></td></tr>
 </table>
+<h4>Some notes on Zoom/Magnification</h4>
+<p>The default for the <em>Minimum</em> setting can be as low as 1%, while <em>Maximum</em> can go no higher than 3200%. Stepping is shown as a percentage, which only makes sense if you are going to a higher magnification. It would be better to think of this as a factor, where 200% = a factor of 2. Going upward, and starting at 100%, you then go to a factor of 2 (200%), of 4 (400%), of 8 (800%), and so on up to your maximum. Going downward, you go to a factor of 1/2 (50%), of 1/4 (25%), of 1/8 (12.5%), and so on down to your minimum. If you change your <em>Stepping</em> to 150%, for example, then 1.5 would be your factor.</p>
+
+<p>If what you want to do is to change the starting point, i.e., the default magnification of the page, then use the <em>Adjust Display Size</em> setting, as shown below under <a href="#14"><strong>Display</strong></a>.</p>
 
 <h3><a name="6"></a>Hyphenation</h3>
 <p>Hyphenation details are described here: <a href="hyphenator.html">Hyphenation in Scribus</a>.</p>